Groveport, OH

Cost to replace furnace with high efficiency. Cost to install furnace and air conditioning. Cost to install a humidifier.

Performed yearly maintenance and safety checks on 2015 rheem furnace. 10 kw heat kit. 21A being pulled 20em /20hp/40aux heat rise. 40/7.5 voltage absorption system reading 40/7.6. Advised dust is starting to show on inside of return. Advised thinking about cleaning. Customer stated it's been about 5 years.

Performed yearly maintenance and safety checks on 2016 rheem furnace. Found unit running with 10.28% o2 18 ppm co in flu. 0 ppm co in supply. 43 degree deltat.

Responded to no cool found dead voltage absorption system. Quoted hn13 customer chose option b for upgraded part. Performed repair. Customer requested check refrigerant. No issues found. Unit running properly upon departure. 20 degree deltat.

Cost to replace air conditioning. Cost to replace insulated return air duct. Their cat tore up the existing return air

Responded to no cool. Customer said it froze up. They let thaw for 24 hours and now thermostat states waiting reading sensors. Customer replaced filter and stated it was very dirty. Believed to be reason for freezing. Found good pressure with low subcooling. Dirty condenser. Offered to clean unit. Stated they will wash unit. Found thermistor had bad connection at heat pump. Replaced wire nuts and ensured good connection. Thermostat reading 91. 86 ambient temperature with sensor in sunlight. Accurate reading on stat. Unit cycled on properly multiple times

Performed yearly maintenance and safety checks on 2015 Rheem heat pump air handler system. Replaced 1625 one filter. 72 in rush amps. 40/5 voltage absorption system reading 40/5. 71/50 19° temperature difference. No concerns at this time

Performed yearly maintenance and safety checks no concerns

Cost to replace air condition. Cost to install furnace, air conditioning and humidifier.

Rheem air conditioner, had loose low-voltage wire tighten connection unit is operating

Breaker off at unit. Resupplied power. Found furnace cycled on properly. Ran for roughly 40 seconds and then blower died off. Advised blower will need replaced. Advised communication blower may have cause issues with board as well. Presented hc6a-e. A for blower b for blower and wheel, c-e as listed. Customer wants to do more research as he wasn’t expecting such a repair cost. Wants quote for replacement equipment as well. Will write quote and email this evening. Platinum - $4037 HC6E COMPLETE AIR MOVEMENT SYSTEM RENOVATION Voltage Enhancement System Rejuvenation Rebuild custom mounting systems Restore system to prime condition Performance and safety testing 1 year safety inspection HC6D COMPLETE AIR MOVEMENT SYSTEM RENOVATION HC6D - 3028 Voltage Enhancement System Rejuvenation Rebuild custom mounting systems Restore svstem to prime condition Performance and safety testing HC6C MAIN AIR MOVEMENT SYSTEM RENOVATION Silver - $2691 Voltage Enhancement System Rejuvenation Performance and sa

Performed yearly maintenance and safety checks on 16 Rheem air conditioning system. Found 40/5 voltage absorption system reading 40/5. Left new 16251 filter. 74 inrush amps.

Performed yearly maintenance and safety checks on O2 Rheem a system. R22. Customer is aware of age and refrigerant. Found 45/5 voltage absorption system reading 42.8/49. 188-226 hard start reading 124. Cleaned 20254 filter customer replaced yesterday. 71RA 49 SA. No issues at this time.

Ac clean and check

Comfort maker heat pump was not operating. Technician arrived. Checked unit found no issues. Customer stated that he had cleaned evaporator coil himself. Technician believes unit was on thermal lockout due to dirty evaporator coil.

Responded to no heat. Found no voltage being sent to inducer motor. Explained customer overtime charges to open supply house. Quoted he20 a-e customer chose option a and understands subject to price change due to part price. Opened supply house. Retrieved part. Had to upgrade repair to option B. Confirmed okay with customer before work performed customer accepted repair cost performed repair and cycled system. Furnace cycled on properly running with 10%o2. 4 ppm co in flu. 0 ppm co in supply. Found inducer motor to be running loud. 99 furnace customer is aware and is expecting to replace before next heating season

Installed a new Bryant Evolution 987M furnace in Groveport, OH. This high-efficiency model offers advanced features like variable-speed operation and quiet performance. Enhancing comfort and energy savings, it ensures reliable heating for our clients in Groveport.

Installed a UV Germicidal Light in Groveport, OH. This feature neutralizes harmful bacteria, mold spores, and viruses. Enhancing air purification, it gives our customer a healthier indoor environment, promoting well-being and comfort.

Performed yearly maintenance  and safety checks on 2015 rheem air handler heat pump system made call for emergency heat. Found 15 kw heat kit pulling 20 amps each. 32 degree deltat. Clean 16251 filter left new. Made call for heat pump heat 20 degree deltat. 40/5 voltage absorption  system reading 40/4.8 no issues at this time.

Cost to replace electric heat pump system with gas furnace

Performed yearly maintenance  and safety  checks on 16 rheem air handler heat pump system. Found 10 kw heat kit pulling 21A each. 20/30/50 degree delta t found 45/7.5 voltage absorption  system reading 45/7.6. System running upon departure.   Customer opted to not have humidifier  coverage. Replaced 16251 filter. No further issues at this time.

Found pilot out. Weak thermocouple.. hm15 customer chose option a. Replaced weak sensor. Started hot water tank. System fired properly without issue. Warming water after roughly 10 minutes. Advised will need a couple hours to take hot shower. Founs water leaking from furnace. Customer had maintenance service performed in recent past. Found loose water line. Resecured water line. No further issues found. Water heater is working upon departure.

Found pilot out. Weak thermocouple.. hm15 customer chose option a. Replaced weak sensor. Started hot water tank. System fired properly without issue. Warming water after roughly 10 minutes. Advised will need a couple hours to take hot shower. Founs water leaking from furnace. Customer had maintenance service performed in recent past. Found loose water line. Resecured water line. No further issues found. Water heater is working upon departure.

Performed yearly maintenance and safety checks on 16 Rheem air handler l heat pump. Found 15 kw heat kit pulling 24 amps each. 25/20 degree deltat. Left new 16251 filter. Founs 40/7.5 voltage absorption system reading 40/7.4. No concerns at this time

Performed yearly maintenance and safety checks on 06 Bryant furnace. Found 11.2%o2 35 ppm co in flu. 0 ppm co in supply. 46 degree delta t. No concerns at this time